安裝完xp sp2沒幾天，我用EAC要抓CD音軌(NB + IEEE 1394外接光碟機)
奇了，以前都可以用的，現在雖然讀得到CD資訊，也能檢查gap，但是不能播放，也不能抓音軌。會出現如下錯誤訊息：
EAC無法正確偵側此光碟機的讀取命令。
您可以嘗試在光碟機屬性對話框中選擇自動偵測讀取命令。
如果你必須手動選擇讀取命令，例如自動偵測導致當機的情況下，你應該確認選擇了正確的命令！
請試著更改這些選項，如果仍然無法使用，請報告你的光碟機情況。
我讓EAC自動偵側光碟機，出現如下錯誤訊息：
EAC無法偵側此光碟機可使用的讀取模式。有可能不支援此光碟機或者需要手動設定此光碟機的一些參數，請換一張CD重試或返回前一畫面。
以前都不會這樣，我新抓EAC 0.95版重新安裝也是一樣。我更新xp sp2後並未更動任何設定，而且現在用windows media player播放同一張CD是沒問題的。有人跟我一樣嗎？
安裝XP sp2後，EAC出問題
版主: DearHoney
昨天太不爽了，就把SP2整個移除，花了一個晚上 。結果還是不行…
剛剛上了EAC官網查了一下Q&A，發現有QA如下：
Q:
I get a message stating that it could not detect my CD-ROM read settings or that it can't find a matching read mode. What can I do?
A:
Sometimes EAC will autodetect a wrong read command. Try to manually select a read command. In the Drive Options, go to Read Commands page and select the Read Command MMC1 manually (or any other that works). Test it with burst mode. If you tested all of them, but none of them worked, try to extract with another program like WinDAC or CDEx. If both also fails, make sure that your drive is capable of extracting digital audio at all.
結果照著做就ok了…現在已經可以用。
真是見鬼，我自從EAC裝好了，從沒有改過那個設定~~
剛剛上了EAC官網查了一下Q&A，發現有QA如下：
Q:
I get a message stating that it could not detect my CD-ROM read settings or that it can't find a matching read mode. What can I do?
A:
Sometimes EAC will autodetect a wrong read command. Try to manually select a read command. In the Drive Options, go to Read Commands page and select the Read Command MMC1 manually (or any other that works). Test it with burst mode. If you tested all of them, but none of them worked, try to extract with another program like WinDAC or CDEx. If both also fails, make sure that your drive is capable of extracting digital audio at all.
結果照著做就ok了…現在已經可以用。
真是見鬼，我自從EAC裝好了，從沒有改過那個設定~~