to 詹姆士踢
不是 <b>Vortex AU8830 Sound Blaster Pro Emulation</b>???
你還有用到 SB 16 Emu 類的東西嘛???
關於MX300..........????????
版主: DearHoney
-
訪客
To JCP大大 <br> 基於於雜音太大了立場我覺得AWE32低頻有力高頻卻不如MX300， <br> 我在喇叭討論區為了回一篇有關SR80接MX300的問題，做了一些測試。 <br> 是同時把音效卡插在電腦上直接測的。 <br> 差別是明顯，但是我覺得有些人或許會認為可忽略......
不過雖然MX300無雜音且高頻(小提琴質感)我比較能接受， <br> 但是我還是比較喜歡把SR325插在AWE32上....因為有點沒力的低頻感覺更怪.....對不起耳機...... <br> 可惜AWE64 Gold不能接耳機.....少了一個測試的對象。
順便請問一下所謂只比音質不比驅動力是什麼意思啊?? <br> 還有您當時發信問我耳機run的好不好後，我有回一篇長信不知道您有沒有收到??
剛剛被DH教訓不能用耳機來評斷音質好壞，所以我以後說話要特別小心。
不過雖然MX300無雜音且高頻(小提琴質感)我比較能接受， <br> 但是我還是比較喜歡把SR325插在AWE32上....因為有點沒力的低頻感覺更怪.....對不起耳機...... <br> 可惜AWE64 Gold不能接耳機.....少了一個測試的對象。
順便請問一下所謂只比音質不比驅動力是什麼意思啊?? <br> 還有您當時發信問我耳機run的好不好後，我有回一篇長信不知道您有沒有收到??
剛剛被DH教訓不能用耳機來評斷音質好壞，所以我以後說話要特別小心。
-
訪客
Vortex AU8830 Sound Blaster Pro Emulation
可是只要裝 8830 的 driver 就會自動抓出阿
<img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15>
<img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15> <img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15> <img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15>
可是只要裝 8830 的 driver 就會自動抓出阿
<img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15>
<img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15> <img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15> <img src="http://www.dearhoney.idv.tw/UBB/NonCGI/icons/frown.gif" width=15 height=15>-
訪客
-
訪客
-
訪客
-
訪客
MX300 移除 SBPro Emu的方法如下： <br> 像我裝2048 Driver一定要先Disable SBPro，不然會跟Geforce相衝...@_@
5.8 - How do I disable Sound Blaster emulation permanently? <br> ------------------------------------------------------------------------------------------ <br> There are two ways to do this - before or after the drivers are installed.
DRIVERS NOT INSTALLED YET
Copy the driver folder from the install CD (or download the latest reference drivers <br> and unzip them) to a directory on your hard drive. Load the AU30MMED.INF file <br> in WordPad or Notepad. Navigate down to this section of the file: <br> [AspenOverides.Addreg].
Remove the semi-colon from the line
;HKR,Config,DisableSBFM,1,1
so that it reads
HKR,Config,DisableSBFM,1,1
Save the file and exit. Now when you install the drivers, the driver will load but <br> not be initialized and will not use any resources. Sound Blaster emulation will <br> not work.
DRIVERS ALREADY INSTALLED
If you already have the drivers installed, you can still disable Sound Blaster <br> emulation via Device Manager. Right click on the My Computer icon on your desktop <br> and select Properties. Click on the Device Manager tab, and then double click on <br> Sound, video, and game controllers to open that section up. Double click on the <br> Sound Blaster Pro emulation listing. On the General tab, check the box that <br> disables the device. A restart is necessary for this to take effect.
照著做就好啦∼
5.8 - How do I disable Sound Blaster emulation permanently? <br> ------------------------------------------------------------------------------------------ <br> There are two ways to do this - before or after the drivers are installed.
DRIVERS NOT INSTALLED YET
Copy the driver folder from the install CD (or download the latest reference drivers <br> and unzip them) to a directory on your hard drive. Load the AU30MMED.INF file <br> in WordPad or Notepad. Navigate down to this section of the file: <br> [AspenOverides.Addreg].
Remove the semi-colon from the line
;HKR,Config,DisableSBFM,1,1
so that it reads
HKR,Config,DisableSBFM,1,1
Save the file and exit. Now when you install the drivers, the driver will load but <br> not be initialized and will not use any resources. Sound Blaster emulation will <br> not work.
DRIVERS ALREADY INSTALLED
If you already have the drivers installed, you can still disable Sound Blaster <br> emulation via Device Manager. Right click on the My Computer icon on your desktop <br> and select Properties. Click on the Device Manager tab, and then double click on <br> Sound, video, and game controllers to open that section up. Double click on the <br> Sound Blaster Pro emulation listing. On the General tab, check the box that <br> disables the device. A restart is necessary for this to take effect.
照著做就好啦∼
:):):):):):)