關於VBR撥放的當機問題
我寫信給原公司 兩天的時間該公司就完成新的Firmware
解決了這個問題 各位可以到原公司網頁找Firmware Utility來更新
http://www.perceptiondigital.com/
以下附上我與公司客服的信件:
My letter:
Subject:Problem of playing VBR MP3 on PD-108
I'm one of the user of your product PD108(FuXion Storage MP3 player)
It's all very fine with this little thing, but I find out that when I played VBR MP3 files on it.
All it's bunction button goes grazy, it wont respond to any of my pressing of controlling.
The strangest of all is that it still playes the MP3 music VERY well.
Just dont know how to stop or turn it off!!!
The only solution I got now it to remove the battery and reinstall it.
I hope this problem could be solved by firmware update........
===============================================
First Reply(2004 2.16)
Dear John,
Yes, we found this problem in all version 3.2 player. This problem is already solved and you can upgrade the player to 3.3. Please go to the download page in our website.
Sorry for the inconveniece caused.
Regards
Iris Cheung
Phone: 852-2269-1168
===============================================
My second letter(2004 2.16 latter ):
Hmm..... I visitied your site a few times after received this mail,
there is only 3.2 drive and I've already upgraded to version 3.2.
or is that you just havn't put it on the web yet?
ex. I tried firmware utility it show the same, version 3.2 for PD-108
===============================================
Reply(2004 2.17):
Dear John,
We are sorry. We will put the latest release 3.4 version in website in one week.
Regards
Iris Cheung
Phone: 852-2269-1168
收到這封信是早上十點左右 剛剛我用FIREWAERE UTILITY就UPDATE到3.4了
而且問題也解決啦
七彩小精靈二的使用者看過來吧 :)
http://www.perceptiondigital.com/downlo ... 040210.zip
把上面那個東西抓回去安裝
好像要重開機一下
然後接上小精靈 run安裝好的firmware utility(到開始裡去找就有)
等程式抓到小精靈後 就可以開始升級了
(那個FIRMWARE UTILITY會到網路上去抓新的FIRMWARE
所以跑的時候網路也要開著)
把上面那個東西抓回去安裝
好像要重開機一下
然後接上小精靈 run安裝好的firmware utility(到開始裡去找就有)
等程式抓到小精靈後 就可以開始升級了
(那個FIRMWARE UTILITY會到網路上去抓新的FIRMWARE
所以跑的時候網路也要開著)
真是好樣的 :eek:killkli 寫:http://www.perceptiondigital.com/downlo ... 040210.zip
把上面那個東西抓回去安裝
好像要重開機一下
然後接上小精靈 run安裝好的firmware utility(到開始裡去找就有)
等程式抓到小精靈後 就可以開始升級了
(那個FIRMWARE UTILITY會到網路上去抓新的FIRMWARE
所以跑的時候網路也要開著)
原來是 online updata!!!
代理商沒講, 原廠網頁也沒寫清楚, 差點錯過了.
還可以自訂開機畫面....這可厲害了!!!! 要好好的玩玩
我也從 3.2 ==> 3.4 了.
